Quidway WB2011 Guía de usuario descargar pdf (Pagina 32)

Hardware Installation

3-4

2. Position the bracket in the intended location and mark the position of the three

mounting screw holes.

3. Drill three holes in the wall that match the screws and wall plugs included in the

bracket kit, then secure the bracket to the wall.

4. Use the included nuts to tightly secure the wireless bridge to the bracket.

Connect the External Antenna

If deploying a WB2011 Master bridge unit in a point-to-multipoint configuration,

you need to mount the external antenna and connect it to the bridge. Perform these

steps:

1. Mount the external antenna to the same supporting structure as the bridge,

within 3 m (10 ft) distance, using the bracket supplied in the antenna package.

2. Connect the antenna to the bridge’s N-type connector using the provided RF

coaxial cable.

3. Apply weatherproofing tape (not included) to the antenna connectors to help

prevent water entering the connectors.

Coaxial Cable

N-type

Connector

External

Omnidirectional

Antenna

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 156 157

Sin comentarios

Quidway WB2011 Guía de usuario Pagina 32